Banana Pi BPI-AI2N Goes on Sale with Yocto and Armbian Images

Banana Pi has announced public availability of its BPI-AI2N embedded vision platform, following the hardware introduction covered last year. The platform combines a system-on-module based on the Renesas RZ/V2N Vision AI MPU with a separate carrier board designed for smart cameras, industrial vision, robotics, and other edge AI applications. As previously covered in June 2025, […]

linuxgizmos.com

Radxa Linkr Brings Remote KVM Access and Tailscale Support to a Thumb-Sized Device

Radxa has unveiled the Linkr, a compact remote-control device for accessing computers, servers, and development boards through a web browser. The unit combines HDMI video capture with USB keyboard and mouse emulation, allowing users to view and operate a target system without connecting a dedicated monitor, keyboard, or mouse. The Linkr connects to the target […]

linuxgizmos.com

ELM11-Feather Debuts with Native Lua and Reconfigurable FPGA Hardware

First seen in March, Brisbane Silicon has now launched the ELM11-Feather to Crowd Supply. Priced at $39, the Feather-compatible development board combines native Lua support with the Arvore IDE and a configurable hardware architecture programmable in C, SystemVerilog, and VHDL. The board uses a GOWIN GW1NR9-C FPGA with approximately 8K LUTs. Its default hardware overlay […]

linuxgizmos.com

DFRobot seeMote Cube tracks motion and sends haptic feedback in visionOS

The DFRobot seeMote Cube is a handheld spatial input device for Apple Vision Pro application development. The 56mm cube combines six-degree-of-freedom tracking, six programmable buttons, Bluetooth connectivity, and app-controlled haptic feedback for interacting with virtual objects and tools in visionOS. According to the DFRobot, the seeMote Cube provides a tangible controller that can be moved, […]

linuxgizmos.com

Espressif begins mass production of ESP32-S31 wireless RISC-V SoC

Espressif has moved the ESP32-S31 into mass production, expanding its wireless microcontroller lineup with a dual-core RISC-V processor, Wi-Fi 6, Bluetooth 5.4, Bluetooth Classic, and IEEE 802.15.4 connectivity. The new SoC targets smart-home hubs, audio devices, industrial automation, edge AI systems, and other connected applications requiring higher processing and wireless performance. The ESP32-S31 combines two […]

linuxgizmos.com

Radxa previews Qualcomm-based CM-Q64 and VMARC-Q9075 compute modules

Radxa has published specifications for two upcoming compute modules based on Qualcomm Dragonwing processors. The compact CM-Q64 combines 12 TOPS of AI performance with multi-camera support, while the larger VMARC-Q9075 uses the SMARC form factor and scales to 200 sparse TOPS for industrial AI, robotics, and machine-vision systems. The Radxa CM-Q64 measures 55 × 40mm […]

linuxgizmos.com

EDATEC ED-IPC1200 and ED-IPC1220 add DIN-rail I/O around Raspberry Pi CM0

EDATEC has expanded its family of Raspberry Pi Compute Module 0-based DIN-rail industrial computers with the ED-IPC1200 and ED-IPC1220. Both models provide Ethernet, USB, RS232, dual RS485, optional wireless connectivity, and isolated control interfaces, while the ED-IPC1220 includes additional digital I/O and analog inputs. The Raspberry Pi Compute Module 0 integrates a 1GHz quad-core 64-bit […]

linuxgizmos.com

ThingPulse Icon256 is a WLED-based word clock with 256 RGB LEDs

The ThingPulse Icon256 is a Wi-Fi-connected word clock that displays the time as illuminated phrases across a 16 × 16 RGB LED matrix. The finished unit includes an enclosure, an English-language front panel, preinstalled firmware, and USB-C power input. The display consists of 256 individually addressable RGB light points positioned behind a letter grid. Instead […]

linuxgizmos.com

PineVoice RISC-V smart speaker supports local wake-word detection for Home Assistant

The PineVoice is a compact RISC-V smart speaker designed to operate as a local voice-assistant satellite for Home Assistant and other platforms supporting the Wyoming protocol. The device combines a dual-microphone array, built-in speaker, local wake-word detection, Wi-Fi and Bluetooth connectivity, and open-source firmware. Previously known as the PineVox, the PineVoice is built around Bouffalo […]

linuxgizmos.com

FriendlyELEC updates NanoPi M6 with ES8389 audio codec and revised I/O

The NanoPi M6V2 is a compact SBC featuring 8K HDMI output, dual MIPI camera and display interfaces, NVMe SSD support, and 6 TOPS of AI performance. The board targets edge-computing applications such as light NAS systems, smart home gateways, digital signage, and portable media players. The RK3588S integrates four Arm Cortex-A76 cores running at up […]

linuxgizmos.com

SpacemiT MUSE Pi Pro is an octa-core RISC-V SBC with Armbian support

The MUSE Pi Pro is an 85 × 56mm single-board computer built around SpacemiT’s M1 processor, combining eight 64-bit RISC-V cores with 2.0 TOPS of AI processing capability. The board provides up to 16GB of LPDDR4X memory, onboard eMMC storage, NVMe expansion, Gigabit Ethernet, Wi-Fi 6, and multiple camera and display interfaces. The SpacemiT M1 […]

linuxgizmos.com

RealSense D585 Pro combines stereo vision, dual IR projectors, and edge processing

The RealSense D585 Pro is a stereo depth camera built around the company’s new Gen 5 vision processor. It combines a 120 × 100-degree field of view, global-shutter sensors, dual infrared projectors, an integrated IMU, and on-device processing for robotics and industrial-vision systems. The Gen 5 SoC incorporates a depth engine, image signal processor, digital […]

linuxgizmos.com

Sfera Labs ships Strato Pi Plus with quad RS-485 and CAN FD

Sfera Labs has begun shipping the Strato Pi Plus, a DIN-rail industrial edge server based on the Raspberry Pi 4B or Raspberry Pi 5. The system adds a 10–50 V DC power supply, up to four isolated RS-485 interfaces, CAN FD connectivity, and an independent RP2354 microcontroller. According to the Strato Pi Plus documentation, the […]

linuxgizmos.com

Raspberry Pi launches 10-inch Touch Display 2 with 1200 × 1920 resolution

Raspberry Pi has introduced a 10-inch version of its Touch Display 2, expanding the display family beyond the existing 5-inch and 7-inch models. The new panel provides a 1200 × 1920 resolution, ten-point capacitive touch, and compatibility with the Raspberry Pi 5 and supported Compute Module platforms. The 10.1-inch IPS display uses a native portrait […]

linuxgizmos.com

Geniatech XPI-3576-CM5 brings 6-TOPS RK3576 performance with Raspberry Pi CM5 compatibility

Geniatech’s XPI-3576-CM5 is a 55 × 40mm compute module built around Rockchip’s RK3576 processor and designed for use with Raspberry Pi Compute Module 5 carrier boards. It combines an octa-core CPU, a 6-TOPS NPU, LPDDR5 memory, optional Wi-Fi 6 connectivity, and commercial- or industrial-temperature configurations. The RK3576 integrates four Arm Cortex-A72 cores running at up […]

linuxgizmos.com

M5Stack broadens embedded lineup with wireless, industrial, and handheld devices

M5Stack has introduced three compact products addressing wireless IoT development, industrial automation, and portable embedded control. The lineup includes the Stamp-C5 module with dual-band Wi-Fi 6 and IEEE 802.15.4 connectivity, the isolated StamPLC IO expansion module, and the lower-cost StickC Plus SE handheld development kit. The Stamp-C5 is based on Espressif’s ESP32-C5HF4 and measures 17.6 […]

linuxgizmos.com

HackRF Pro SDR covers 100kHz to 6GHz with FPGA-based processing

The HackRF Pro is an open-hardware software-defined radio platform from Great Scott Gadgets that supports transmission and reception from 100kHz to 6GHz. The half-duplex transceiver maintains backward compatibility with software and accessories developed for the earlier HackRF One. The HackRF Pro follows the same general architecture as its predecessor but introduces several RF, processing, timing, […]

linuxgizmos.com

Clintech Pico Board exposes all 48 RP2354B GPIOs in Pico-compatible form factor

Clintech has launched a Crowd Supply campaign for the Clintech Pico Board, an open-hardware microcontroller board based on Raspberry Pi’s RP2354B. The board retains the 51 × 21mm Raspberry Pi Pico footprint while exposing all 48 GPIOs available from the larger RP2354B package. The RP2354B combines dual 150MHz Arm Cortex-M33 cores with dual Hazard3 RISC-V […]

linuxgizmos.com

Tronlong TLT153-MiniEVM pairs quad-core Cortex-A7 processing with a Xuantie E907 RISC-V core

Tronlong’s TLT153-MiniEVM is an 80 × 130mm industrial evaluation board built around a 45 × 45mm SoM based on the Allwinner T153 processor. Key features include three Gigabit Ethernet ports, USB 2.0, HDMI, MIPI-DSI, microSD, dual expansion headers, and support for CAN-FD and additional serial interfaces. The Allwinner T153 is manufactured on a 22nm process […]

linuxgizmos.com

Ka-Ro QS93 and QS95 solder-down modules come with Linux evaluation boards

Germany-based Ka-Ro Electronics’ QS93 and QS95 are compact solder-down computer-on-modules based on NXP i.MX 9 application processors. The QS93 combines dual Cortex-A55 cores with an Arm Ethos-U65 microNPU in a 27mm-square package, while the QS95 uses six Cortex-A55 cores, a 2-TOPS NPU, additional multimedia interfaces, and PCIe connectivity. The QS93 is based on the NXP […]

linuxgizmos.com

HackerBox 0128 Mesh Deck explores LoRa communication with Meshtastic

HackerBox has released Issue 0128, titled “Mesh Deck,” a DIY communications platform built around a ProMicro nRF52840 development board, an SX1262-based LoRa module, a GPS receiver, an OLED display, and a miniature QWERTY keyboard. The kit focuses on assembling and configuring a portable Meshtastic node for decentralized messaging without cellular or internet service. The main […]

linuxgizmos.com

armStone MX8ULP packs NXP i.MX 8ULP into a 100mm Pico-ITX single board computer

F&S Elektronik Systeme GmbH has showcased the armStone MX8ULP, a Pico-ITX single board computer based on the NXP i.MX 8ULP processor. The 100 × 72 mm platform targets industrial, IoT, and human-machine interface applications, combining low-power processing, real-time capabilities, and multiple connectivity options. The armStone MX8ULP integrates the NXP i.MX 8ULP SoC, which combines two […]

linuxgizmos.com

LILYGO showcases new IoT devices with ESP32-C5 and Nordic nRF52840 MCUs

LILYGO has listed two compact development boards for wireless IoT applications: the T-Display C5, a small ESP32-C5-based board with a color LCD and dual-band Wi-Fi 6, and the T-Echo Card, a rugged LoRa-enabled device with GNSS, Bluetooth, NFC, solar charging, and an IP66-rated enclosure. The LILYGO T-Display C5 is built around the ESP32-C5, providing 2.4GHz […]

linuxgizmos.com

WINSYSTEMS SBC-477 PowerTier Series delivers Raptor Lake performance in a rugged SBC design

WINSYSTEMS’ SBC-477 PowerTier Series is a family of compact rugged single board computers for industrial and MIL/COTS applications, combining 13th Gen Intel Core Raptor Lake processors with DDR5 memory, dual Ethernet, Mini PCIe expansion, TPM 2.0 security, and extended-temperature operation. The SBC-477 PowerTier Series is based on 13th Gen Intel Core Raptor Lake hybrid processors, […]

linuxgizmos.com

GL.iNet Comet X Quad-Port Remote KVM with PoE and 4K HDMI

GL.iNet’s Comet X is a quad-port remote KVM designed for centralized management of up to four servers or PCs. The device features browser- or app-based remote access, Power over Ethernet, 4K HDMI passthrough, local console access, and onboard storage for system images or recovery files. The Comet X, model GL-RM4PE, is powered by a quad-core […]

linuxgizmos.com

Axiomtek MANO330 SBC features Intel N97/N150, HDMI, VGA, and LVDS

Axiomtek’s MANO330 is a coming-soon Thin Mini-ITX single-board computer designed around Intel Processor N97 and N150 options, with DDR5 memory, multiple display interfaces, dual LAN, and M.2 expansion for compact embedded systems. According to the product listing, the MANO330 supports DDR5-4800 SO-DIMM memory with up to 32GB capacity. Expansion options include an M.2 Key B […]

linuxgizmos.com

Solid Sands webinar to cover C++ multithreading qualification with SuperGuard

Solid Sands, an Amsterdam-based provider of compiler and library testing technology, will host a July 8 webinar titled “SuperGuard: Comprehensive Testing for C++ Multi-Threading Primitives,” focused on C++ multithreading qualification for safety-critical software. Multithreading is increasingly important in applications such as autonomous vehicles, robotics, industrial systems, and embedded AI platforms, where software must coordinate work […]

linuxgizmos.com

NanoKVM-Go compact USB-C KVM supports WiFi 6 and 4K capture

Sipeed has launched the NanoKVM-Go on Kickstarter as a compact USB-C KVM device for remote access to laptops, mini PCs, tablets, phones, and other USB-C devices. The device combines video capture, keyboard and mouse control, WiFi 6 connectivity, and browser-based access through a single USB-C connection. The NanoKVM-Go is described as a portable alternative to […]

linuxgizmos.com

RootBoard open-hardware Linux handheld launches with Raspberry Pi Zero support

Kickstarter recently featured the RootBoard, a Raspberry Pi-powered handheld Linux computer aimed at makers, developers, educators, cyberdeck builders, and users interested in a compact open-hardware Linux terminal. The device combines a small display, integrated keyboard, speaker, power-management circuitry, and support for Raspberry Pi Zero-class boards. The RootBoard is designed for use with the Raspberry Pi […]

linuxgizmos.com

Forgix hybrid board pairs Raspberry Pi RP2354 MCU with Efinix Trion FPGA

Adiuvo Engineering’s new ultra-compact, dual-chip Forgix development board pairs the Raspberry Pi RP2354 microcontroller with an Efinix Trion T8 FPGA in a breadboard-friendly Teensy form factor. Designed for developers exploring hardware-software co-design, the board combines dual-core Arm Cortex-M33 processing with 7,384 logic elements of programmable fabric. The Forgix board utilizes a split architecture divided between […]

linuxgizmos.com